b.waal/PiAutomation
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
Added warning for using 5GHz WLAN with HDMI-1
This commit is contained in:
Beeranco 2023-08-14 16:28:19 +02:00 committed by GitHub
parent 7e48cc6469
commit 673809d6dd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@ -43,6 +43,11 @@ Otherwise read the section: Enabling wireless LAN
## Enabling wireless LAN: ## Enabling wireless LAN:
``` ```
IMPORTANT! If you're planning to use 5GHz wireless LAN do NOT use the HDMI-1 port.
This can cause bad interference with the wireless radio due to HDMI signals at certain screen resolutions.
Use the HDMI-0 port (the port closest to the power/USB-C connection).
When using 2.4GHz wireless LAN this is not an issue and you can choose wich HDMI port to use.
Close the Raspberry Pi Imager. Close the Raspberry Pi Imager.
Open a text editor on your system and paste the following: Open a text editor on your system and paste the following:
@ -60,6 +65,7 @@ Save the file as wpa_supplicant.conf to the SD card labeled "bootfs" in your exp
Be aware to make sure there is no .txt extension in the filename! Be aware to make sure there is no .txt extension in the filename!
You can now eject the SD card, setup your Pi and boot from the SD card. You can now eject the SD card, setup your Pi and boot from the SD card.
Remember: you MUST use a LAN cable for the initial setup!!! Remember: you MUST use a LAN cable for the initial setup!!!
After running the installer in the last section of this readme you can disconnect the LAN cable!!! After running the installer in the last section of this readme you can disconnect the LAN cable!!!