Update 'Installer.sh'

Added dialog to ensure the device has an static ip.
Added option to install SmartPing and it's dependencies when Domoticz is selected.
Added unzip as default pre-requirement.
Fixed NodeJS by installing it's dependencies first with the install.list, afterwards install the program.
Added Personalisation for username Jarno
Added different greetings depending on the selected options in the installer menu.

Installer.sh

@@ -86,6 +86,15 @@ if [[ $AGREE != "yes" ]]; then
     INSTALL=no
   fi
 fi
+
+if (whiptail --title "Pi Automation" --yesno "Is this device configured with a static IP?." 8 78); then
+  echo ""
+  else
+  whiptail --title "Pi Automation" --msgbox "Configure a static IP first!" 8 78
+  clear
+  exit
+fi
+
 if [[ $INSTALL == no ]]; then
   whiptail --title "Pi Automation" --msgbox "Installation canceled!" 8 78
   clear
@@ -131,6 +140,15 @@ if [[ $SKIPoptions != "yes" ]]; then
   "Monitor-Service" "Autologin the Pi user to show system and service statuses. (usefull with TFT)" OFF 3>&1 1>&2 2>&3)
 fi
 
+if [[ $OPTIONS == *"Domoticz"* ]]; then
+  if (whiptail --title "Domoticz Options" --yesno "Use a Smart-Pinger that tracks your phones presence?\nThis is done by searching for your phones Wifi and Bluetooth status." 8 78); then
+    SMARTPING=yes
+    whiptail --title "Important" --msgbox "Make sure to set up your mobile device to use a static ip!" 8 78
+  else
+    SMARTPING=no
+  fi
+fi
+
 if [[ $SKIPhomer != "yes" ]]; then
   if [[ $OPTIONS == *"Homer"* ]]; then
     ISP=$(whiptail --title "Configure Options" --radiolist \
@@ -206,28 +224,34 @@ sleep 3
 dphys-swapfile swapoff ; dphys-swapfile uninstall ; update-rc.d dphys-swapfile remove
 systemctl disable ModemManager
 
-echo "python3-dev python3-pip" >> /tmp/install.list
+echo "python3-dev python3-pip unzip" >> /tmp/install.list
 if [[ $OPTIONS == *"Domoticz"* ]]; then
-  echo "apt-utils git unzip cron libudev-dev libsqlite3-0 libcurl4 libusb-0.1-4" >> /tmp/install.list
+  echo "apt-utils git cron libudev-dev libsqlite3-0 libcurl4 libusb-0.1-4" >> /tmp/install.list
+  if [[ $SMARTPING == "yes" ]]; then
+  echo "fping" >> /tmp/install.list
+  fi
 fi
+
 if [[ $OPTIONS == *"Node-RED"* ]]; then
   echo "build-essential git mosquitto mosquitto-clients" >> /tmp/install.list
 fi
 if [[ $OPTIONS == *"Zigbee2MQTT"* ]]; then
   echo "git make g++ gcc mosquitto mosquitto-clients" >> /tmp/install.list
   if [[ $OPTIONS != *"Node-RED"* ]]; then
-    echo "ca-certificates gnupg nodejs" >> /tmp/install.list
+    echo "ca-certificates gnupg curl" >> /tmp/install.list
     mkdir -p /etc/apt/keyrings
-    curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key | gpg --dearmor -o /etc/apt/keyrings/nodesource.gpg
   fi
 fi
+
 if [[ $OPTIONS == *"Unattended-Upgrades"* ]]; then
   echo "unattended-upgrades apt-listchanges" >> /tmp/install.list
 fi
+
 if [[ $OPTIONS == *"Homer"* ]]; then
-  echo "nginx unzip" >> /tmp/install.list
+  echo "nginx" >> /tmp/install.list
 fi
 
+
 ##-----------##
 #   Updater   #
 ##-----------##
@@ -243,6 +267,14 @@ echo "ufw" >> /tmp/install.list
 echo "gcc g++ gawk autoconf automake python3-cmarkgfm libssl-dev attr libxxhash-dev libattr1-dev liblz4-dev libzstd-dev acl libacl1-dev" >> /tmp/install.list
 xargs < /tmp/install.list xargs $PKGI
 
+#Run updater again for installation NodeJS since now the required dependencies are installed on the system.
+if [[ $OPTIONS != *"Node-RED"* ]]; then
+  curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key | gpg --dearmor -o /etc/apt/keyrings/nodesource.gpg
+  echo "deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_$NODE_MAJOR.x nodistro main" | sudo tee /etc/apt/sources.list.d/nodesource.list
+  echo "nodejs" > /tmp/install.list
+  $PKGUD
+  xargs < /tmp/install.list xargs $PKGI
+fi
 
 ##-------------##
 #   Installer   #
@@ -312,6 +344,12 @@ if [[ $OPTIONS == *"Domoticz"* ]]; then
   chmod +x /etc/init.d/domoticz.sh
   update-rc.d domoticz.sh defaults
   systemctl start domoticz
+  if [[ $SMARTPING == "yes" ]]; then
+    mkdir -p /var/log/pid/
+    mkdir -p /var/pinger
+    wget $GIT/$BRANCH/Domoticz/SmartPinger.sh -O /opt/pinger/Smartping-NAME.sh
+    wget $GIT/$BRANCH/Domoticz/SmartPinger.service -O /etc/systemd/system/Smartping-NAME.service
+  fi
 fi
 
 
@@ -424,6 +462,23 @@ if [[ $OPTIONS == *"Homer"* ]]; then
   fi
 fi
 
+
+##-------------------##
+#   Personalization   #
+##-------------------##
+
+if [[ $NAME == "Jarno" ]]; then
+  if [[ $OPTIONS == *"Domoticz"* ]]; then
+    wget $GIT/$BRANCH/Domoticz/Customisation/custom.css -O /opt/domoticz/www/styles/dark-th3me/custom.css
+    wget $GIT/$BRANCH/Domoticz/Customisation/bosduif.jpg -O /opt/domoticz/www/styles/dark-th3me/images/domoticz.jpg
+  fi
+  if [[ $OPTIONS == *"Homer"* ]]; then
+    wget $GIT/$BRANCH/Homer/Customisation/light.jpeg -O /var/www/html/assets/wallpaper-light.jpeg
+    wget $GIT/$BRANCH/Homer/Customisation/dark.jpeg -O /var/www/html/assets/wallpaper.jpeg
+  fi
+fi
+
+
 ##-----------------##
 #   Optimizing Pi   #
 ##-----------------##
@@ -495,7 +550,13 @@ TERM=ansi whiptail --title "Pi Automation" --infobox "Finishing." 8 78
 sleep 3
 
 wget $GIT/$BRANCH/Updater.sh -O /opt/updater.sh
-wget $GIT/$BRANCH/MOTD/greetings.sh -O /etc/profile.d/greeting.sh
+
+if [[ $SMARTPING == "no" ]]; then
+  wget $GIT/$BRANCH/MOTD/greetings.sh -O /etc/profile.d/greeting.sh
+  else
+  wget $GIT/$BRANCH/MOTD/greetings-pinger.sh -O /etc/profile.d/greeting.sh
+fi
+
 sed -i -e "s/%name%/$NAME/g" /etc/profile.d/greeting.sh
 
 mkdir -p /opt/backups/timestamps/