diff --git a/DomoService.conf b/DomoService.conf
new file mode 100644
index 0000000..d9604e2
--- /dev/null
+++ b/DomoService.conf
@@ -0,0 +1,184 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          domoticz
+# Required-Start:    $network $remote_fs $syslog $time
+# Required-Stop:     $network $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Home Automation System
+# Description:       This daemon will start the Domoticz Home Automation System
+### END INIT INFO
+
+# Do NOT "set -e"
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+DESC="Domoticz Home Automation System"
+NAME=domoticz
+USERNAME=root
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+DAEMON=/opt/domoticz//$NAME
+DAEMON_ARGS="-daemon"
+#DAEMON_ARGS="$DAEMON_ARGS -daemonname $NAME -pidfile $PIDFILE"
+DAEMON_ARGS="$DAEMON_ARGS -www 8080"
+DAEMON_ARGS="$DAEMON_ARGS -sslwww 0"
+#DAEMON_ARGS="$DAEMON_ARGS -log /tmp/domoticz.txt"
+#DAEMON_ARGS="$DAEMON_ARGS -syslog"
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+pidof_domoticz() {
+    # if there is actually a domoticz process whose pid is in PIDFILE,
+    # print it and return 0.
+    if [ -e "$PIDFILE" ]; then
+        if pidof domoticz | tr ' ' '\n' | grep -w $(cat $PIDFILE); then
+            return 0
+        fi
+    fi
+    return 1
+}
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+        # Script that waits for time synchronisation before starting Domoticz to prevent a crash
+        # on a cold boot when no real time clock is available.
+
+        # Check if systemd-timesyncd is enabled and running, otherwise ignore script
+        if systemctl --quiet is-enabled systemd-timesyncd && systemctl --quiet is-active systemd-timesyncd; then
+            # Check if time is already synced, if so start Domoticz immediately
+            if [ -f "/run/systemd/timesync/synchronized" ]; then
+                printf "Time synchronized, starting Domoticz...\n"
+            else
+                # Check if custom time server(s) are defined
+                if grep -q "^#NTP=" /etc/systemd/timesyncd.conf; then
+                    printf "INFO: No time server(s) defined in /etc/systemd/timesyncd.conf, using default fallback server(s)\n"
+                fi
+                # Wait a maximum of 30 seconds until sync file is generated indicating successful time sync
+                printf "Waiting for time synchronization before starting Domoticz"
+                count=30
+                while [ ! -f "/run/systemd/timesync/synchronized" ]
+                do
+                    count=$((count-1))
+                    if [ $((count)) -lt 1 ]
+                    then
+                        # If failed, print error message, exit loop and start Domoticz anyway
+                        printf "\nWARNING: Time synchronization failed, check network and /etc/systemd/timesyncd.conf\n"
+                        printf "Starting Domoticz without successful time synchronization...\n"
+                        break
+                    fi
+                    printf "."
+                    sleep 1
+                done
+                #If the file was found in time, sync was successful and Domoticz will start immediately
+                if [ -f "/run/systemd/timesync/synchronized" ]
+                then
+                    printf "\nTime synchronization successful, starting Domoticz...\n"
+                fi
+            fi
+        fi
+
+        # Return
+        #   0 if daemon has been started
+        #   1 if daemon was already running
+        #   2 if daemon could not be started
+        start-stop-daemon --chuid $USERNAME --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+                || return 1
+        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+                $DAEMON_ARGS \
+                || return 2
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+        # Return
+        #   0 if daemon has been stopped
+        #   1 if daemon was already stopped
+        #   2 if daemon could not be stopped
+        #   other if a failure occurred
+        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+        RETVAL="$?"
+        [ "$RETVAL" = 2 ] && return 2
+        # Wait for children to finish too if this is a daemon that forks
+        # and if the daemon is only ever run from this initscript.
+        # If the above conditions are not satisfied then add some other code
+        # that waits for the process to drop all resources that could be
+        # needed by services started subsequently.  A last resort is to
+        # sleep for some time.
+        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+        [ "$?" = 2 ] && return 2
+        # Many daemons don't delete their pidfiles when they exit.
+        rm -f $PIDFILE
+        return "$RETVAL"
+}
+
+case "$1" in
+  start)
+        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+        do_start
+        case "$?" in
+                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+        esac
+        ;;
+  stop)
+        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+        do_stop
+        case "$?" in
+                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+        esac
+        ;;
+  status)
+        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+        ;;
+  reload)
+        log_daemon_msg "Reloading $DESC" "$NAME"
+        PID=$(pidof_domoticz) || true
+        if [ "${PID}" ]; then
+                kill -HUP $PID
+                log_end_msg 0
+        else
+                log_end_msg 1
+        fi
+        ;;
+  restart)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+        do_stop
+        case "$?" in
+          0|1)
+                do_start
+                case "$?" in
+                        0) log_end_msg 0 ;;
+                        1) log_end_msg 1 ;; # Old process is still running
+                        *) log_end_msg 1 ;; # Failed to start
+                esac
+                ;;
+          *)
+                # Failed to stop
+                log_end_msg 1
+                ;;
+        esac
+        ;;
+  *)
+        echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload}" >&2
+        exit 3
+        ;;
+esac
+
+: